Where to buy Vape devices in Serbia (Hcigar Akso) (v2)
Vape devices advice for Serbia, covering palette, what to look for and where the trade-offs actually sit.
Local availability in Serbia shapes the practical answer more than the marketing does. The 3.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
Most Serbia buyers start with a well-known brand name and then discover that fit and coil availability matter far more. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Replacement coils are widely available, and the 1.2 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.2 Ω mesh coil changes the draw character compared with the 20:80 PG/VG liquid sitting in the chamber.
In Serbia, availability of the 1.2 Ω mesh coil is the practical bottleneck, not the device itself. The mesh tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 20:80 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
Two things to check before ordering: the Micro-USB socket on the base and whether the 1.2 Ω mesh coil is the newer generation. Battery behaviour is where the Innokin X earns its keep: the 1500 mAh cell holds a usable charge for most of a day at 90 and recharges over Micro-USB. We would pair the Innokin X with a 20:80 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Airflow control on the Innokin X is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. The 3.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1627 full puffs from a charge at 6 mg/ml, based on average session length in our testing.
The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 1.2 Ω mesh mark before the profile flattens and a swap makes sense. In Serbia, availability of the 1.2 Ω mesh coil is the practical bottleneck, not the device itself.
Specifications
Every unit in the Innokin X family shares the same core platform, so the differences come down to the numbers below.
| Reference model | Innokin X |
|---|---|
| Brand family | KangerTech |
| Battery capacity | 1500 mAh |
| Power range | 90 W |
| Liquid capacity | 3.5 ml |
| Coil | 1.2 Ω mesh |
| Bottle size | 100 ml |
| Liquid ratio | 20:80 PG/VG |
| Nicotine strength | 6 mg/ml |
| Material | ABS + glass |
| Charge port | Micro-USB |
| Connector | Q-Plus |
| Airflow | mesh window |
| Mouthpiece | mesh tip |
Flavour and performance notes
A representative profile is Coconut Pineapple: creamy, tropical, described as smooth coconut layered over pineapple. On a 20:80 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.2 Ω mesh mark before the coil begins to mute it.
Practical considerations in Serbia
Availability in Serbia is the factor that decides most outcomes here. Confirm the 1.2 Ω mesh and the Micro-USB are both in stock before committing, and check that the Q-Plus matches your existing device if you already own hardware. Duty and RSD rates move, so treat prices as current rather than fixed.
Our advice is to order one, use it for a fortnight, and only then decide whether to stock up.
