Vape devices reviews: tested in Serbia (Innokin Sceptre) (v3)
Vape devices advice for Serbia, covering upgrades, what to look for and where the trade-offs actually sit.
The gap between a mid-range and a premium vape devices narrows once you know which components you actually use. Replacement coils are widely available, and the 0.8 Ω mesh coil is the sensible default to keep in stock.
Most Serbia buyers start with a well-known brand name and then discover that fit and coil availability matter far more. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all.
Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over Type-C fast charge takes about 44 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Type-C fast charge socket on the base and whether the 0.8 Ω mesh coil is the newer generation.
Battery behaviour is where the Innokin X earns its keep: the 5000 mAh cell holds a usable charge for most of a day at 150 and recharges over Type-C fast charge. We would pair the Innokin X with a 55:45 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.8 Ω mesh coil is the sensible default to keep in stock.
The 1.6 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1610 full puffs from a charge at 6 mg/ml, based on average session length in our testing. Delivery across Serbia is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window.
Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 0.8 Ω mesh mark before the profile flattens and a swap makes sense.
What surprised us most was how little the 0.8 Ω mesh coil changes the draw character compared with the 55:45 PG/VG liquid sitting in the chamber. The Graphite finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the Q-Plus takes a small amount of care to keep clean, which we cover in the maintenance section below.
Specifications
Every unit in the Innokin X family shares the same core platform, so the differences come down to the numbers below.
| Reference model | Innokin X |
|---|---|
| Brand family | Voopoo |
| Battery capacity | 5000 mAh |
| Power range | 150 W |
| Liquid capacity | 1.6 ml |
| Coil | 0.8 Ω mesh |
| Bottle size | 200 ml |
| Liquid ratio | 55:45 PG/VG |
| Nicotine strength | 6 mg/ml |
| Material | zinc alloy |
| Charge port | Type-C fast charge |
| Connector | Q-Plus |
| Airflow | dual bottom |
| Mouthpiece | mesh tip |
Flavour and performance notes
A representative profile is Cola Zero: sweet, fizzy, described as cola sweetness with a light fizz. On a 55:45 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.8 Ω mesh mark before the coil begins to mute it.
Practical considerations in Serbia
Availability in Serbia is the factor that decides most outcomes here. Confirm the 0.8 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the Q-Plus matches your existing device if you already own hardware. Duty and RSD rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.
